Nylon

PROPERTIES	ASTM METHOD	TYPICAL VALUES
Tensile Strength Elongation Flexural Modulus Flexural Strength Izod Impact Strength Notched @ 73 F @-40 F Unnotched @ 73 F @-40 F Heat Deflection Temperature @ 264 psi Specific Gravity Mold Shrinkage Gardner Impact	D-638 D-638 D-790 D-790 D-256 D-256 D-256 D-256 D-268 D-792 D-955 D-3029	7,400 psi (51 MPa) 50% 275,000 psi (1900 MPa) 9,500 psi (65 MPa) 1.5 ft-lb/in (80 J/m) 1.1 ft-lb/in (59 J/m) 22 ft-lb/in (1170 J/m) 15 ft-lb/in (800 J/m) 120 F (49 C) 1.05 1.8 % 120 in-lbs (1.1 J)

To the best of our knowlege the information herein is accurate. However, neither Adell Plastics, Inc., nor any of its affiliates assumes any liability whatsoever for the accuracy or completeness of the information contained herein. Determination of the suitability of any information or material for the use contemplated, manner of use, and whether there is any infringment of patents is the sole responsibility of the user. The above information gives typical properties only and is not to be used for specific purposes.